All About TV & Speaker Stand Ideas

In this instance, you may want to consider a corner TV cabinet or stand which will fit much more easily into a smaller area....

Be sure that the corner wall-mount bracket and hardware are sufficiently rated to hold your particular television. A flat-screen TV set weighing more than 125 pounds should be mounted with a dual-arm bracket. Smaller sets can be wall-mounted using a single-arm bracket....

Repeat the measurement process with the intersecting wall. Determine which wall has the smallest working room before running into an obstacle. For example, if one side is 20 inches but the other is 27 inches, you may not use anything larger than 20 inches as...

You can make a speaker move less in many different ways, and one of those is by adding more mass to the speaker and the stand; making it harder for the speaker to move. That’s why you’ll find a sand compartment in most stands....

Just make sure you are aware of the potential disadvantages of large screen TV cabinets before you make your decision....

This offers a flat surface to place your TV on the top (or you can hang it on the wall), plus there are wooden and glass doors which offer an enclosed area for your AV equipment. Very stylish....

Mount the television to the wall bracket and secure the bolts. This is a two-person job, so get someone to hold the television while the bolts are attached to the back of the component....

Many stands come with a compartment dedicated to sand and similarly heavy and well-damped materials. And there’s method in the madness. You see, the speaker plays music by moving its drive unit in and out to create sound pressure: when the drive unit pushes outwards,...

Entertainment centers such as this one fill an entire wall and have a back panel that connects all the pieces. It ”s a good opportunity in such cases to play with various combinations of colors. The dark vs light contrast is widely emphasized in a...

The heavier the stand, the less it will move, and with many hi–fi and pro–audio speaker stands (including many of the models made by Atacama, for example), it’s possible to fill the hollow support column with a heavy material to add mass and to damp...