Adjust the TV to the desired viewing angle by pivoting the set on the mounting arm(s), which are typically a ball-and-socket arrangement that allows the set to be turned.
Select the desired height for the television and with a pencil mark the position on the wall where the mounting bracket will be bolted through the wall into the studs.
In previous years, corner television stands tended to be made from glass, and in many ways, they are similar to a standard glass TV stand.
Measure the front of your television. Unlike picture size, which is determined by measuring on a diagonal (lower left to upper right), the width of the TV is ascertained by measuring from the lower right corner to the lower left. Write this number down.
Follow the television manufacturer’s instructions for attaching the wall mount to the back of the set. Most flat-panel TVs have a four-point mounting system on the back of the set. Four bolts or screws must be removed from the rear of the console. The wall mounting bracket attaches at these four points on the set.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does LocalHost claim ownership or responsibility for such items and you should seek legal consent for any use of such materials from its owner.