Category : Speaker Stands

That’s where you need to put the sub. If your sub has a phase adjustment knob, or a polarity–invert switch, adjust this until you hear the loudest result from frequencies around the crossover point, typically 80 to 120 Hz....

You can make a speaker move less in many different ways, and one of those is by adding more mass to the speaker and the stand; making it harder for the speaker to move. That’s why you’ll find a sand compartment in most stands....

Even if you already have a loudspeaker stand, you can still use one of these foam–based speaker platforms on top of it to reduce the amount of vibration getting into the stand and subsequently into the floor. Many of the commercially available platforms come with...

Each type of entertainment center or wall unit addresses to a particular type of space or ambiance. In this particular space, for example, a white lower cabinet was chosen in order to ensure a more spacious and airy feel. The wall-mounted pieces contrast with the...

Mount the television to the wall bracket and secure the bolts. This is a two-person job, so get someone to hold the television while the bolts are attached to the back of the component....

Flat screen TV cabinets (sometimes called a credenza) are a slightly different option when compared to the other types of stand discussed here....

Just make sure you are aware of the potential disadvantages of large screen TV cabinets before you make your decision....

You have many different choices when thinking about how you are going to install your AV equipment, and in some circumstances a corner TV cabinet or stand can be a useful solution....

In the early days of flat panel televisions, the vast majority of TV units were glass TV stands....

Of course, not all entertainment centers rely on diversity. Some, such as the Oak Blackbird, are designed to be compact and to offer all the basic requirements in a simple form which doesn ”t occupy a lot of floor space or diminish the room ”s...