Depending on the layout of your room, you may have a choice between locating your equipment along a wall or possibly using a corner of your room.
Glass TV stands are usually available with optional casters, and so make a good choice if you will need to move the TV around the room.
Note that the rear of this unit doesn’t go into a sharp point. There are two main types of corner stand to consider. Some are slightly tapered, like the one in the example here.
The shape of these stands mean that they are narrower at the back than the front, and so it is critical to consider the depth of AV components to ensure they fit inside. You are also unlikely to fit two pieces of equipment side-by-side due to the narrow design.
If you’re looking to place your TV in the corner of a room, make sure to measure the corner to ensure you have enough space. Corners are often situated alongside door wells or openings, giving you a specific amount of space to work with. Use a standard mathematical equation to determine if your corner is wide enough to fit your TV stand.
Use a stud finder to locate the studs in the corner where the TV will be installed.
Drill holes for the mounting bracket into the studs following the wall markings as a guide. Use wall anchors if studs are not located in the corner where the TV will be installed, but be certain the wall construction is sufficient to support the television. Wood paneling, for example, may not be strong enough to support the set without splitting or cracking.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does LocalHost claim ownership or responsibility for such items and you should seek legal consent for any use of such materials from its owner.