Follow the television manufacturer’s instructions for attaching the wall mount to the back of the set. Most flat-panel TVs have a four-point mounting system on the back of the set. Four bolts or screws must be removed from the rear of the console. The wall mounting bracket attaches at these four points on the set.
However, more recently, it is more common to find a wooden corner TV stand. The Sauder Harbor View Corner TV Stand pictured below is a good example. There are plenty of nooks and crannies to place your equipment, but the rear corners are cut to allow easier placement in a corner.
Use a stud finder to locate the studs in the corner where the TV will be installed.
They are part of a wide range of different furniture styles that you will have to choose between when you are looking for a way to store your home cinema equipment and flat screen TV.
Depending on the layout of your room, you may have a choice between locating your equipment along a wall or possibly using a corner of your room.
Measure the front of your television. Unlike picture size, which is determined by measuring on a diagonal (lower left to upper right), the width of the TV is ascertained by measuring from the lower right corner to the lower left. Write this number down.
Mount the television to the wall bracket and secure the bolts. This is a two-person job, so get someone to hold the television while the bolts are attached to the back of the component.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does LocalHost claim ownership or responsibility for such items and you should seek legal consent for any use of such materials from its owner.