Follow the television manufacturer’s instructions for attaching the wall mount to the back of the set. Most flat-panel TVs have a four-point mounting system on the back of the set. Four bolts or screws must be removed from the rear of the console. The wall mounting bracket attaches at these four points on the set.
As mentioned above, glass corner TV stands are quite common, although there are a few wooden corner stands on the market in addition to a few enclosed corner TV cabinets.
However, more recently, it is more common to find a wooden corner TV stand. The Sauder Harbor View Corner TV Stand pictured below is a good example. There are plenty of nooks and crannies to place your equipment, but the rear corners are cut to allow easier placement in a corner.
Drill holes for the mounting bracket into the studs following the wall markings as a guide. Use wall anchors if studs are not located in the corner where the TV will be installed, but be certain the wall construction is sufficient to support the television. Wood paneling, for example, may not be strong enough to support the set without splitting or cracking.
The corners can be a useful place to locate your hardware, as it utilizes an area of your room that is often wasted – and placing your equipment along a wall can often encroach too far into your living space.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does LocalHost claim ownership or responsibility for such items and you should seek legal consent for any use of such materials from its owner.