Be careful with the enclosed corner TV cabinet and make sure AV components will receive adequate ventilation. A removable back panel will be a major advantage in this situation – and the addition of a proper ventilation system is even more advantageous.
Use the wall level to make sure the mounting bracket will be level and parallel to the floor so that the television does not hang at an angle.
The shape of these stands mean that they are narrower at the back than the front, and so it is critical to consider the depth of AV components to ensure they fit inside. You are also unlikely to fit two pieces of equipment side-by-side due to the narrow design.
Measure the front of your television. Unlike picture size, which is determined by measuring on a diagonal (lower left to upper right), the width of the TV is ascertained by measuring from the lower right corner to the lower left. Write this number down.
Drill holes for the mounting bracket into the studs following the wall markings as a guide. Use wall anchors if studs are not located in the corner where the TV will be installed, but be certain the wall construction is sufficient to support the television. Wood paneling, for example, may not be strong enough to support the set without splitting or cracking.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does LocalHost claim ownership or responsibility for such items and you should seek legal consent for any use of such materials from its owner.