Corner stands are available in numerous styles and can be made from a number of different materials.
Note that the rear of this unit doesn’t go into a sharp point. There are two main types of corner stand to consider. Some are slightly tapered, like the one in the example here.
Place the front end of the tape measure in the corner, measuring the distance from the corner to the first obstacle on one side of the wall (such as a window or door opening).
However, more recently, it is more common to find a wooden corner TV stand. The Sauder Harbor View Corner TV Stand pictured below is a good example. There are plenty of nooks and crannies to place your equipment, but the rear corners are cut to allow easier placement in a corner.
Select the desired height for the television and with a pencil mark the position on the wall where the mounting bracket will be bolted through the wall into the studs.
Adjust the TV to the desired viewing angle by pivoting the set on the mounting arm(s), which are typically a ball-and-socket arrangement that allows the set to be turned.
Be sure that the corner wall-mount bracket and hardware are sufficiently rated to hold your particular television. A flat-screen TV set weighing more than 125 pounds should be mounted with a dual-arm bracket. Smaller sets can be wall-mounted using a single-arm bracket.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does LocalHost claim ownership or responsibility for such items and you should seek legal consent for any use of such materials from its owner.