However, more recently, it is more common to find a wooden corner TV stand. The Sauder Harbor View Corner TV Stand pictured below is a good example. There are plenty of nooks and crannies to place your equipment, but the rear corners are cut to allow easier placement in a corner.
The main advantage of a corner stand or cabinet is that it will push right back into the corner of your room and can save you a considerable amount of space.
If you decide to purchase a corner TV stand with a mount, you should bear in mind the stand will not fit as deep into the corner as a model without a mount. This is because brackets usually attach to the rear of the stand and you will be restricted by the width of the TV.
Be careful with the enclosed corner TV cabinet and make sure AV components will receive adequate ventilation. A removable back panel will be a major advantage in this situation – and the addition of a proper ventilation system is even more advantageous.
Drill holes for the mounting bracket into the studs following the wall markings as a guide. Use wall anchors if studs are not located in the corner where the TV will be installed, but be certain the wall construction is sufficient to support the television. Wood paneling, for example, may not be strong enough to support the set without splitting or cracking.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does LocalHost claim ownership or responsibility for such items and you should seek legal consent for any use of such materials from its owner.