Drill holes for the mounting bracket into the studs following the wall markings as a guide. Use wall anchors if studs are not located in the corner where the TV will be installed, but be certain the wall construction is sufficient to support the television. Wood paneling, for example, may not be strong enough to support the set without splitting or cracking.
Corner stands are available in numerous styles and can be made from a number of different materials.
You have many different choices when thinking about how you are going to install your AV equipment, and in some circumstances a corner TV cabinet or stand can be a useful solution.
Follow the television manufacturer’s instructions for attaching the wall mount to the back of the set. Most flat-panel TVs have a four-point mounting system on the back of the set. Four bolts or screws must be removed from the rear of the console. The wall mounting bracket attaches at these four points on the set.
Measure the front of your television. Unlike picture size, which is determined by measuring on a diagonal (lower left to upper right), the width of the TV is ascertained by measuring from the lower right corner to the lower left. Write this number down.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does LocalHost claim ownership or responsibility for such items and you should seek legal consent for any use of such materials from its owner.