Repeat the measurement process with the intersecting wall. Determine which wall has the smallest working room before running into an obstacle. For example, if one side is 20 inches but the other is 27 inches, you may not use anything larger than 20 inches as it will overlap the smaller side.
Use a stud finder to locate the studs in the corner where the TV will be installed.
Be careful with the enclosed corner TV cabinet and make sure AV components will receive adequate ventilation. A removable back panel will be a major advantage in this situation – and the addition of a proper ventilation system is even more advantageous.
This corner TV stand comes with two doors and a glass front that will display everything you need. There are also a total of four shelves to ensure you have ample room for your entertainment ensemble. The piece will fit in any corner easily.
If you have many AV components and think that most corner TV stands do not offer adequate storage space, you could always consider a standard TV stand which has tapered corners. Much like the ones highlighted on this page.
However, more recently, it is more common to find a wooden corner TV stand. The Sauder Harbor View Corner TV Stand pictured below is a good example. There are plenty of nooks and crannies to place your equipment, but the rear corners are cut to allow easier placement in a corner.
Use the wall level to make sure the mounting bracket will be level and parallel to the floor so that the television does not hang at an angle.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does LocalHost claim ownership or responsibility for such items and you should seek legal consent for any use of such materials from its owner.