Repeat the measurement process with the intersecting wall. Determine which wall has the smallest working room before running into an obstacle. For example, if one side is 20 inches but the other is 27 inches, you may not use anything larger than 20 inches as it will overlap the smaller side.
Drill holes for the mounting bracket into the studs following the wall markings as a guide. Use wall anchors if studs are not located in the corner where the TV will be installed, but be certain the wall construction is sufficient to support the television. Wood paneling, for example, may not be strong enough to support the set without splitting or cracking.
However, more recently, it is more common to find a wooden corner TV stand. The Sauder Harbor View Corner TV Stand pictured below is a good example. There are plenty of nooks and crannies to place your equipment, but the rear corners are cut to allow easier placement in a corner.
The corner TV cabinet or stand is one of the different types of TV furniture you will come across.
Measure the front of your television. Unlike picture size, which is determined by measuring on a diagonal (lower left to upper right), the width of the TV is ascertained by measuring from the lower right corner to the lower left. Write this number down.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does LocalHost claim ownership or responsibility for such items and you should seek legal consent for any use of such materials from its owner.