If you have many AV components and think that most corner TV stands do not offer adequate storage space, you could always consider a standard TV stand which has tapered corners. Much like the ones highlighted on this page.
Adjust the TV to the desired viewing angle by pivoting the set on the mounting arm(s), which are typically a ball-and-socket arrangement that allows the set to be turned.
For example, some cabinets feature a vented base which pulls cool air from underneath the cabinet and expels warmer air out of the cable ports in the rear panels.
Input the equation into your calculator. Use the smaller measurement of the two walls as both the A and B measurements. For example, if the smaller measurement is 20 inches, you want to input 20 squared (or 20 x 20) plus 20 squared (or 20 x 20). Once you have the answer (in this case it is 800), find the square root of the number and you will have the size, in inches, your TV must be smaller than in order to fit onto a TV stand (in this case it is about 28 inches).
Use the wall level to make sure the mounting bracket will be level and parallel to the floor so that the television does not hang at an angle.
With this type of stand, it is important to carefully consider if your existing AV components will fit.
Although these will require more space than a corner TV stand, they will still save some space whilst offering far more storage.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does LocalHost claim ownership or responsibility for such items and you should seek legal consent for any use of such materials from its owner.